FINISH PRO SC 765
Product Label
Safety Data Sheet

Main Features

  • Cotton is prepared by machine harvesting.
  • It is provided to be collected 10-15 days earlier.
  • Manual harvesting becomes easier.
  • By shedding the leaves of the cotton, the rotting of the base cocoons is prevented.
  • The risk of damage from frost and adverse weather conditions is reduced. For this reason, it is possible to finish the harvest early and prepare the field in autumn.

Detailed Table Information

Plant Name Purpose of usage Application Dose and Period Time Between Last Application and Harvest
Cotton By accelerating the cocoon opening, providing early and one-time harvesting, facilitating the harvest with leaf fall and preparing the cotton for machine harvesting. 175 ml/daTechnically close to the top and harvestable bolls when mature (too hard to cut easily with a knife and light brown around the seed circumference in section) 7 days

Active Ingredient and Its Ratio

720 g/l Ethephon + 45 g/l Cyclanilide – 120 g/l

Packaging Types

5 LT

PREPARING THE PLANT PROTECTION PRODUCT FOR APPLICATION

First, the required amount of plant protection product is mixed with some water in a separate container. The prepared mixture is added to the tank of the sprayer filled with water up to half by mixing. The tank is completed with the required amount of water, mixed again and made ready for spraying. Prepare enough mixture to be used on the same day.

USAGE OF THE PLANT PROTECTION PRODUCT

If the undiluted plant protection product is spilled on the equipment, it may leave permanent stains. In such cases, wash the contaminated parts with plenty of water within 1 hour. For a good wetting, 20-30 l water / da should be used with ground tools.

If rain is expected within 6-8 hours, the application should not be made.

For a productive harvest, the opening of the cocoons should be closely monitored. Harvest should not be done before 7 days from the application, and the harvest should not be delayed too long in order not to cause a loss. It is suitable for harvesting 14-21 days after application under normal conditions.
Within 30 days after FINISH PRO SC 765 application, corn, cereals; Vegetables whose leaves are eaten within 60 days; Do not plant root vegetables such as carrots and radishes within 120 days.