Main Features

• Interrupt SC 240; It contains 228.6 g/l Spiromesifen and 11.4 g/l Abamectin.
• Thanks to its different effect mechanisms, it is effective in all periods of red spiders.
• Spiromecefene is contact effective. Abamectin acts both by contact and by stomach.
• While spiromiciphene is not transported systemically, abamectin can reach the lower surface of the leaf translaminarly.

Detailed Table Information

Plant Name	Harmful Organism Name	Dosage and period of administration	Time Between Last Application and Harvest
Cotton	red spider(Tetranychus cinnabarinus) two-spotted spider mite (Tetranychus urticae)	35 ml/dalarva, nymph, adult, egg 35 ml/da larva, nymph, adult, egg	21 days
Apple	european red spider(Panonychus ulmi)	35 ml/100 l water larva, nymph, adult, egg	14 days

Active Ingredient and Its Ratio

228.6 g/l Spiromesiphene and 11.4 g/l Abamectin

Packaging Types

350ML, 1L

PREPARING THE PLANT PROTECTION PRODUCT FOR APPLICATION

The plant protection product calculated over the recommended dose is first mixed with some water in a separate container. The tank of the application machine is half filled with water. While the mixer of the machine is in operation, the mixture is added to the tank. Continuing to mix, the tank is completed with water. The mixing process is continued until the application is completed. The prepared plant protection product should be used within the same day. The amount of water to be used per decare should be 20-40 liters, fan jet nozzles should be used in applications.

CALIBRATION : The
application machine must be calibrated before the application. The amount of mixture to be given to a certain area should be well adjusted to provide a good coating in applications. Applications should be made at cool times of the day, in windless or slightly windy weather conditions.

CLEANING THE SPRAYING MACHINE:
Empty the sprayer’s tank safely right after the application is complete. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and waste into water sources.

USAGE OF THE PLANT PROTECTION PRODUCT

Shake well before use.

Cotton : The field is divided into 4 sections and one leaf is taken from 25 plants in 10-15 steps in each section, a total of 100 leaves are counted with a magnifying glass. If 5 Red Spiders per leaf are reached in the Mediterranean and
10 in the Aegean and Southeast, the coating is applied. Partial application can be made in edge smears. According to the equipment to be used, the amount of water to go to one decare should be determined by calibrating and the necessary product should be added to the determined amount of water. If tractor-pulled ground tools will be used, nozzles between rows should be used.

Apple : Spraying should be done if the number of European spider mites is 8-10 individuals per leaf, in periodic counts of 100 leaves, starting from May. Controls should be continued until the end of August with 15-day intervals after the first spraying and spraying should be done if the intensity is seen.